Assa Abloy 9M800 TCNE1 Series Especificaciones descargar pdf (Pagina 7)

Check cylinder components.

NOTE: Cylinders longer than 1-1/8" (29mm) will require collars.

Refer toCylinder Collar Chart below.

2. When required, cut cylinder tailpiece.

Correct length is 1/16" to 3/16" (2 to 5mm) beyond cylinder housing cam.

3. Assemble cylinder.

Insert cylinder housing prongs into matching notches of escutcheon.

Pass cylinder tailpiece thru cylinder collar (when required) and slot

in cylinder cam. Fasten cylinder in escutcheon recess or collar

using (2) mounting screws.

(DO NOT OVER TIGHTEN SCREWS).

6) Installation Instructions (Rim and SecureBolt™)

Cylinder

Tailpiece

Cylinder Collar

(when required)

Cam must be positioned as shown

when cylinder tailpiece is assembled

Escutcheon Assembly

Lever is handed, LHR (shown).

NOTE: Lever Return Spring is handed.

Hand of trim cannot be changed without

correct spring.

LHR, part number 651F618 (Red)

RHR, part number 651F628 (Blue)

Cylinder Housing Cam

(2) Cylinder Mounting Screws.

Supplied with cylinder

Cylinder Collar Chart

Cylinder length Collar

1-1/8" (29)

None

1-1/4" (32)

422F88*

1-1/2" (38)

686F98*

* Specify Finish

Rim Cylinder

Lever Return Spring handing can be identified

by the color of the spring:

6.3)

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

Sin comentarios

Assa Abloy 9M800 TCNE1 Series Especificaciones Pagina 7