Assa Abloy 9M800 TCNE1 Series Especificaciones Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 21
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
7) Installation Instructions (Mortise)
16
7.4) Installation of Outside Trim and Exit Device
Exit Device
Cover
Solenoid
Wire Harness
“B”
“A”
“B”
“A”
Device
Finger
(2) 1/4-20
Pan Head Screws
Trim
Gasket
TRIM GASKET APPLICATION:
Peel off the adhesive protective paper
from gasket. Feed Trim assembly solenoid
wire harness through gasket opening as
shown and firmly press gasket to
escutcheon, aligning edge of gasket with
the edge of the escutcheon.
8 Pin
Molex
Doorwire
2 Pin
Methode
Solenoid
2 Pin
Molex
REX
1. Seat device against door. NOTE: Device finger must engage
latch bolt lever through slot in door and lock case/cover.
2. Fasten device to trim assembly through holes “B” using (2) 1/4 - 20 pan head
screws.
3. Follow instructions packed with device to secure device to door. Tighten all screws.
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21

Comentarios a estos manuales

Sin comentarios